Have there been any independent third-party flashlight reviews of Elzetta Flashlights?Yes. Independent LED flashlight reviews of Elzetta Tactical LED Flashlights may be seen by following the links below.
Video Review by James YeagerVideo Review by MrgunsngearFLOOD Lens Video Review by Mrgunsngear
Review with beam shot comparisons by FlashlightGuide.com
Video Review by PFCtraining.comVideo:Torture Test by TWANGnBANGReview at JerkingTheTrigger.comVideo: Helicopter drop test by Dustin EllermannVideo Review by MrColionNoirBlog entry by GrantCunningham.comVideo Review by PFCtraining.comVideo Review by Andrew T of Vuurwapenblog.comShootingReviews.com by John ShirleyToolGuyd.comTactical Testing & Evaluation by 2LT Reid I.Torture Test by Ares Armor (shot with shotgun!)WoodsMonkey.com by Luke CauseyVuurwapenblog.com by Andrew T.Fonarevka(Russian LED flashlight review forum)
Academy of Aegis (Czech Republic)
Officer.com by Frank BorelliEric Dean of Threat SolutionsWeapon Evolution by StickmanLaymansLights (LED flashlight review website )
What options are available on Elzetta Modular Flashlights?Options include a Standard Bezel, Low Profile Bezel (1.25 inch outer diameter), or a
Crenellated Strike Bezel, a 2-Cell or a 3-Cell Body, and a Rotary, Clicky, High/Low, or High/Strobe Tailcap. Any combination of these components may be ordered as a complete assembled Tactical LED Flashlight. All components are also sold separately. New High Output Heads with AVS Technology are also available for applications where a tremendous amount of light is desired.
Are Elzetta Flashlight components interchangeable?Yes, all Elzetta Flashlight components are interchangeable, interoperable, and available individually for simple changes/modifications/upgrades.
What is the advantage of a 3-Cell Model?With 235-lumen models, 3-Cell Bodies provide 50% longer runtime than 2-Cell Bodies. With new High Output models, patent-pending AVS Technology automatically senses the 3-Cell input voltage and produces 900 lumens of light (High Output Head produces 650 lumens with a 2-Cell Body).
From what material are Elzetta Tactical LED Flashlights made?All exterior components of Elzetta are made from
Mil-Spec Type III Hard Anodized 6061-T6 Aluminum.
What are the weight and dimensions of Elzetta Tactical LED Flashlights?Every Elzetta Flashlight has a body diameter of 0.99" (25 mm) (1-inch nominal). 2-Cell models with batteries weigh from 5.3 to 6.2 oz (150 to 176 g) and measure 4.7" to 5.5" (120 mm to 140 mm) in length. 3-Cell models with batteries weigh 6.6 to 7.5 oz (187 to 213 g) and measure 6.0" to 6.8" (152 mm to 173 mm) in length.
When installing an Elzetta Tactical LED Flashlight in an Elzetta Flashlight Mount ( ZFH1500, ZORM, ZROC, or ZSM) are the Sizing Adapters needed?No, with its 1-inch body, Elzetta Flashlights fit all Elzetta Flashlight Mounts without the Sizing Adapters (Sizing Adapters are included with each Elzetta Flashlight Mount to accommodate flashlights with diameters less than 0.97 inches).
Are Elzetta Tactical LED Flashlights compatible with Surefire P60 light modules?No, Elzetta Flashlights has been specifically designed and optimized exclusively for Malkoff Devices M60
LED modules and/or new High Output Heads. Units from Surefire or other manufacturers are not compatible. Use of other devices should not be attempted.
Why is there grease inside the Bodies of Elzetta Tactical LED Flashlights?Elzetta Flashlights have been designed to optimize electrical and thermal conduction with the LED module. The grease enhances this conduction while inhibiting corrosion.
Must the outer-body O-rings be used to mount Elzetta Tactical LED Flashlights in Elzetta Tactical Flashlight Holder Mounts?No, the outer-body O-rings, which are included with Elzetta Flashlights, provide additional retention strength when properly installed in Elzetta Tactical Flashlight Holders but are generally not required.
Why do Elzetta Tactical LED Flashlights get warm during extended operation?LED modules, with their extremely high output Light Emitting Diodes, naturally produce heat. Elzetta Flashlights have been designed to efficiently conduct this heat into the aluminum body to extend the performance of the flashlight. Discontinue hand-held use if the temperature of the body becomes uncomfortably warm.
Are batteries included with Elzetta Tactical LED Flashlights?Yes, each complete Elzetta Tactical Light comes with a fresh set of USA Made 123A lithium batteries.
Will an Elzetta Tactical LED Flashlight run on rechargeable RCR123 batteries?2-Cell Models may be operated on RCR123 batteries for non-critical applications, but 3-Cell Models should not use these batteries under any circumstances.
Are Lanyard Rings available for Elzetta Tactical LED Flashlights?Yes, lanyard rings are available for Elzetta Tactical Flashlights. Please
contact usWhere are Elzetta Tactical LED Flashlights made?All Elzetta products, including Flashlights, are designed, engineered, and manufactured in the USA using American materials, tooling, and labor. God bless America!